Vibrator, dental technology, 120 W, (JT-51B), up to max. 2 kg, surface: 15x20 cm

Powerful, highly efficient vibrator for dental technicians and dentists.
It can be used for moulding with plaster or for inlays.
The rubber work surface is easily removable, which makes cleaning easier.

The vibration can be set to two levels - low (low) or high (high) - which can be changed as required by turning the switch.
Due to the gap between the vibration platform and the transformer, a loud noise is to be expected during operation.

Turn the switch to the middle position ("O") before switching on, then you can switch on the device (indicated by the indicator light) and select the vibration intensity from the two levels. Finally, you can also adjust the vibration intensity by turning the switch.

In the event of a fault, disconnect the machine from the mains, remove the rubber pad, turn the machine over, place it on a flat surface and remove the M6 screws with a star screwdriver. Check that the feet are not loose and that the height of the feet is the same. If not, tighten all 4 feet so that the height is 68 mm.

Additional features:

• Manufacturer: Dochem
• Voltage: 220V/50Hz ± 10%
• Power: 120W
• Maximum load: ≤ 2 kg
• Dimensions of the vibrating surface: 20 x 15 cm.
• Height of the product: 10 cm
• Certifications: CE