GC CAVITON Temporary filling material Jar, 30g, White (286) (10000101)

Temporary filling material

HYDRAULIC TEMPORARY RESTORATIVE
For use only by a dental professional in the recommended indications.
RECOMMENDED INDICATIONS
As a temporary filling material.
DIRECTIONS FOR USE
a) Dry the prepared cavity with a small cotton pellet.
b) Transfer the material to the cavity using a suitable instrument and form the
contour. In the case of occlusal Class I cavities let the patient bite down on the
surface, and then form the contour.
c) Ask the patient to close his / her mouth. The filling will harden in about 30
minutes by absorbing moisture. Recommend the patient to avoid pressure or
abrasion for at least 1 hour.
Notes:
1. Do not mix or contaminate with any other material.
2. When removing the filling, clean the cavity with an alcohol soaked cotton pellet.
3. Close the jar immediately.
STORAGE
Recommended for optimal performance, store at temperature of
4-25°C (39.2-77.0°F).
PACKAGES
Jar 30 g, white or pink
CAUTION
1. In rare cases the product may cause sensitivity in some people. If any such
reactions are experienced, discontinue the use of the product and refer to a
physician.
2. Personal protective equipment (PPE) such as gloves, face masks and safety
eyewear should always be worn.
Some products referenced in the present IFU may be classified as hazardous
according to GHS. Always familiarize yourself with the safety data sheets
available at:
http://www.gceurope.com
They can also be obtained from your supplier.
CLEANING AND DISINFECTING:
MULTI-USE DELIVERY SYSTEMS: to avoid cross-contamination between
patients this device requires mid-level disinfection. Immediately after use inspect
device and label for deterioration. Discard device if damaged.
DO NOT IMMERSE. Thoroughly clean device to prevent drying and accumulation
of contaminants. Disinfect with a mid-level registered healthcare-grade infection
control product according to regional / national guidelines.
Undesired effects- Reporting: