GC Pattern Resin LS 1-1 (100g+105ml)

GC Pattern Resin LS is a low-shrinkage modelling resin that has proven its worth in dentistry and dental technology for more than 15 years. During this time, it has proven to be a safe, simple and versatile material. GC Pattern Resin was specially developed for the brush technique.

Thanks to its unique processing properties, it can also be used for combination work, crowns, bridges, implants and galvanic techniques.
GC Pattern Resin LS is also suitable for certain partial restorations such as acrylic dies, pre-soldering and core build-ups.

GC Pattern Resin LS 1-1 pack contains everything you need for the brush technique:
GC Pattern Resin LS powder and liquid, 2 mixing cups, 1 brush and 1 pipette for measuring the liquid. The powder and liquid must be used in the correct mixing ratio.

RECOMMENDED AREA OF APPLICATION
(1) Modelling:
* Cone crowns for telescopic crowns and other telescopic crowns
* Inlays, palatal and lingual arches, connectors and clasps
* Maryland bridges
(2) Temporary attachments for soldering
(3) Direct post fabrication in the mouth
(4) Fabrication of implant abutments

The material contains methyl methacrylate. When used directly in the mouth for die moulding, special care should be taken to avoid contact with the skin or mucous membranes. In the event of accidental contact, remove the material immediately and wash the surrounding area with plenty of water.

Physical properties:
Processing time (23°C) 2-3 minutes
2-3 min knitting time (23°C) 4 min
Flexural strength (37°C, after 10 min) 63 MPa
Polymerisation shrinkage after 30 min: 0.36 %
Polymerisation shrinkage after 24 hours: 0.37 %.

Chemical composition:
Powder: polymethyl methacrylate, polymethyl methacrylate, dibenzoyl peroxide
Liquid: methyl methacrylate, 2-hydroxyethyl methacrylate

COMPOSITIONS:
1. 100 g powder, 1 kg
2. liquid: 100g (105ml), 250g (262ml)
3. 1-1 package: 100g powder, 100g (105ml) liquid, accessories
.