Spident EsCem A2 - two-component adhesive cement in syringe, 8 g

Dual bonding adhesive cement in syringe, 1-step bonding for "all" cases.

Indication:

1. permanent bonding of all-ceramic restorations

2. final bonding of metal crowns, bridges, inlays, onlays, posts, screws

3. final bonding of composite restorations

4. Final bonding of implant abutments made of ceramic, composite or metal

2 types of bonding:

a.) blue light 440-490 nm, min. 1200 mW/cm2 min 20 sec.

b.) 60 seconds for inserting the prosthesis, 5 minutes for bonding without light.

Composition:

organic matrix: tegdma, udma, hema, 10-mdp

organic matrix: 0.7-16 micron micro-silica (53%)

Other: initiator, catalyst, stabiliser, etc.

Liability:

After preparing and cleaning the tooth surface, wash the tooth. Dry the tooth, but be careful not to overdry it. Do not use Hyperol or Edta as this will affect the strength of the bond. Apply the adhesive to the tooth with the swab. You have 1 minute to place the tooth in the correct position. Illuminate the edges of the tooth for 1 second, then remove the excess adhesive! Then either continue to light the tooth or wait 5 minutes and it will stick by itself.

Contents of the box:

- 1 syringe (8g)

- 5 brown mixing tips without tip + 5 intraoral tips

- 5 mixing tips

- 1 mixing block